Procedure and documentation related to the installation of the Nowa classic system
The installation guide for the Nowa classic system
Tue, 10 Mar, 2020 at 11:47 AM
This document helps you note the location and numbers of your Nowa classic sensors. We recommend printing it and sticking near by the Nowa classic master m...
Tue, 10 Mar, 2020 at 11:50 AM
This document helps you configure the position of all your classic wireless water sensors (NOWDSF200). The wired sensor is always # 17
Tue, 10 Mar, 2020 at 11:52 AM
This picture shows you which holes on the Nowa classic is used to communicate troubles or alarms via dry contacts. They are usually connected to a security ...
Tue, 10 Mar, 2020 at 11:56 AM
This document explains how to install and configure the NOWBREAK-30 to a Nowa classic system. The breaker is used to stop pumps or other devices that uses ...
Tue, 10 Mar, 2020 at 11:58 AM
Here is a picture that shows how to install the Nowa valve. installers needs to be careful and follow the guide when installing the Nowa valve. If the ...
Tue, 10 Mar, 2020 at 12:00 PM
This picture show all the connections and their usage on the Nowa classic master module.
Tue, 10 Mar, 2020 at 12:01 PM
This document explains how to connect an Aqua-Protec system to a Nowa classic master module. This is used to close the main water valve when sewer backup i...
Tue, 10 Mar, 2020 at 1:28 PM
The screws template of the master module to fix on the wall.
Tue, 10 Mar, 2020 at 1:30 PM