Procedures for installation or configuration of the Nowa 360 compatible equipment.
A document that explain how to manually open the Nowa valve. This bypass the standard behavior of the Nowa 360 system. Make sure to test your valve after ...
Thu, 22 Oct, 2020 at 10:37 AM
This document explains to you all the necessary steps to configure a new water sensor (triangle or round sensor).
Thu, 11 Feb, 2021 at 11:43 AM
This document explains how to adjust the sound of the control panel to the desired level
Mon, 7 Dec, 2020 at 9:26 AM
This document explains how to configure email or SMS notifications in the Nowa 360 system.
Thu, 11 Feb, 2021 at 1:29 PM
This document explains how to configure a Z-Wave device to the Nowa 360 and link it to an automation. This is useful for installers who wants to stop a pum...
Thu, 11 Feb, 2021 at 1:43 PM
This document explains on how to install and configure a RF repeater. The RF repeater is used to extend the signal range of all sensors communicating throu...
Thu, 11 Feb, 2021 at 1:34 PM
How to connect a Nowa 360 to Internet with an Ethernet cable This procedure explain how to connect a Nowa 360 to Internet with an Ethernet cable
Mon, 17 May, 2021 at 11:34 AM
This document explains how to configure a Nowa 360 without Internet. Even though it is highly recommended to connect it to Internet, in may be unavailable ...
Thu, 11 Feb, 2021 at 1:56 PM
This document explains how to configure a Nowa 360 system to automatically close the valve when no motion is detected by the system. Motion can be triggere...
Tue, 8 Jun, 2021 at 11:02 AM
This document explains how to configure the date and time in a Nowa 360 system. The system should only loose his time and date when it is not connected to ...
Thu, 11 Feb, 2021 at 4:03 PM